Roundabout Construction - Winnipesaukee Forum

no-engine Roundabout Construction 03-23-2012, 07:45 AM

mcdude From the Laconia Sun 03-23-2012, 08:19 AM

AC2717 Great Detours starting the... 03-23-2012, 08:27 AM

nicole I am a full-time resident of... 03-23-2012, 11:40 AM

Woodsy As a resident of the Weirs I... 03-23-2012, 11:56 AM

jrc I drive through the... 03-23-2012, 12:22 PM

patman ...and some people don't... 03-23-2012, 12:33 PM

BroadHopper Laconia council and city... 03-23-2012, 06:47 PM

john60ri Rotary 03-23-2012, 07:25 PM

Lakesrider The problems started when it... 03-24-2012, 07:59 AM

kauriel I agree the rotary will... 03-24-2012, 08:22 AM

no-engine driving rotaries &... 03-25-2012, 09:42 AM

Belmont Resident bad idea 03-25-2012, 10:22 AM

RailroadJoe Instead of yield signs, put... 03-25-2012, 11:02 AM

jmen24 I can't understand the issues... 03-25-2012, 02:48 PM

Slickcraft A lot of people dislike the... 03-25-2012, 04:54 PM

corollaman Just another waste of our tax... 03-25-2012, 09:45 PM

fatlazyless If you have driven through... 10-03-2012, 02:41 AM

songkrai Waste of good tax payer... 10-03-2012, 06:58 AM

Lakesrider Like the entire length of RT... 10-03-2012, 09:47 AM

AC2717 absolutley, not to mention... 10-03-2012, 10:02 AM

inquiring one I find both local circles to... 10-03-2012, 04:37 PM

Altonbayicefishingfool Yup, waste of time and money.... 10-04-2012, 03:10 PM

Jonas Pilot If they don't have a... 10-04-2012, 04:04 PM

Belmont Resident Drove by the Weirs today.... 10-04-2012, 04:20 PM

fatlazyless When the Meredith roundabout... 10-05-2012, 07:54 AM

patman How about bare land with some... 10-05-2012, 08:22 AM

AC2717 it was in pelham, and the... 10-05-2012, 08:06 AM

Rusty 11B and Rt 3 will use the... 10-05-2012, 08:48 AM

AC2717 thanks for the info, from MA,... 10-05-2012, 09:04 AM

Happy Gourmand Weirs Roundabout 10-05-2012, 10:06 AM

Sunbeam lodge I have driven through the... 10-05-2012, 10:10 AM

Rusty Under study now by the NH DOT... 10-05-2012, 10:40 AM

PaugusBayFireFighter The middle of the rotary has... 10-05-2012, 10:41 AM

AC2717 thanks for the photo PBF any... 10-05-2012, 10:44 AM

Woodsy I live in the Weirs and... 10-05-2012, 11:05 AM

PaugusBayFireFighter The only issue would be... 10-05-2012, 11:16 AM

no-engine SO what you are saying is the... 10-05-2012, 01:56 PM

Wolfeboro_Baja Too late for some people! I... 10-08-2012, 09:49 AM

Woodsy The roundabout should be... 10-08-2012, 10:38 AM

Happy Gourmand I agree. So many of the... 10-08-2012, 11:53 AM

Woodsy I think a fair shot is in... 10-08-2012, 12:31 PM

no-engine Wait till done for your... 10-08-2012, 12:54 PM

SIKSUKR Looks pretty much in size as... 10-08-2012, 01:53 PM

More replies below current depth...

nicole I am a full time resident of... 10-05-2012, 11:24 AM

RailroadJoe I pity the fire truck and 18... 10-05-2012, 01:07 PM

no-engine Watch big rigs go thru... 10-05-2012, 01:58 PM

RailroadJoe If I remember correctly, the... 10-05-2012, 04:56 PM

Rusty It looks like the roundabout... 10-08-2012, 07:41 PM

Belmont Resident I believe those are crosswalks 10-09-2012, 05:10 AM

SIKSUKR From what I can see Rusty is... 10-09-2012, 10:22 AM

Belmont Resident Yup, my bad. I went back and... 10-09-2012, 05:29 PM

no-engine IT's almost done, but... 11-03-2012, 12:31 PM

fatlazyless Driving down the hill, past... 11-04-2012, 05:17 AM

Bob M Driving Down The Hill 11-04-2012, 10:44 AM

fatlazyless ....smooth concrete vs.... 11-17-2012, 06:40 AM

Rusty When are you going to get... 11-17-2012, 07:54 AM

john60ri Fll 11-17-2012, 08:48 AM

WickedGoodOutdoors Looks Expensive. Maybe you... 11-18-2012, 10:41 AM

NHBUOY ...FLL is no LJK Setright,... 11-18-2012, 12:38 PM

NoBozo FLL probably sees no reason... 11-18-2012, 03:04 PM

Rusty I don't think he spends too... 11-18-2012, 03:36 PM

Reilly Citgo Station, not Phillips... 11-19-2012, 06:08 AM

PaugusBayFireFighter Here's a picture showing the... 11-20-2012, 02:40 PM

AC2717 signs signs everywhere... 11-20-2012, 02:47 PM

BroadHopper Cobblestone vs. Concrete 11-20-2012, 02:55 PM

Lakesrider OK so who is going to be the... 11-20-2012, 07:27 PM

NoBozo I am going to set up a TIRE... 11-20-2012, 07:43 PM

fatlazyless Meredith & Plymouth go... 11-20-2012, 07:54 PM

PaugusBayFireFighter NB...First thing I looked at,... 11-20-2012, 08:07 PM

songkrai Just drove through. Lots of... 11-21-2012, 12:46 PM

PaugusBayFireFighter Please don't dare me...I'm... 11-20-2012, 08:01 PM

ApS http://winnipesaukee.com/forum... 11-21-2012, 05:38 AM

PaugusBayFireFighter More than likely they would... 11-21-2012, 08:36 AM

upthesaukee [At a fortuitous distance, I... 11-21-2012, 08:52 AM

PaugusBayFireFighter We had a rotary, not a... 11-21-2012, 09:33 AM

AC2717 Iknow it well, went there,... 11-21-2012, 09:34 AM

03-23-2012, 07:45 AM	#1
no-engine Senior Member Join Date: Jul 2008 Location: West side Winnipesaukee, Lakes Region Posts: 516 Thanks: 20 Thanked 52 Times in 40 Posts	Roundabout Construction NOW, apparently the roundabout construction has started! Appears that Busby Construction rents space behind the burned saloon, for their office trailer, equipment and concrete pipes already delivered to edge of road to the drive-in. [speculate a little rental income for the owners!] Some back-hoe digging has started! Weirs is on the way; if nothing else, construction site lookers will drive by! Like peering through a fence hole at a city construction site!