The Dive!

[fatlazyless]

Hey ..... for $9500 in Wilmington, Vermont ..... here's the perfect used tour boat for a second 'The Dive'

..... 53' long x 18' wide .... formerly the Mt Hills tour boat, a pontoon that weighs about 15 tons with two Volvo Penta diesel inboards

..... price: $9500 ...... not too shabby! ..... would they let it go for $5000 ..... maybe, just to unload it?

https://vermont.craigslist.org/boa/d...974004333.html

..... with six photos except for some unknown reason, this link does not work here.

[baygo]

Originally Posted by fatlazyless

Hey ..... for $9500 in Wilmington, Vermont ..... here's the perfect used tour boat for a second 'The Dive'

..... 53' long x 18' wide .... formerly the Mt Hills tour boat, a pontoon that weighs about 15 tons with two Volvo Penta diesel inboards

..... price: $9500 ...... not too shabby! ..... would they let it go for $5000 ..... maybe, just to unload it?

https://vermont.craigslist.org/boa/d...974004333.html

..... with six photos except for some unknown reason, this link does not work here.

Does anybody know how to move it from there to here?

[Outdoorsman]

Originally Posted by baygo

Does anybody know how to move it from there to here?

Length is not an issue, the 18' with sure is .

I would guess it would have to be split down the middle lengthwise and transported like one of those double-wide mobile homes.

[fatlazyless]

Originally Posted by baygo

Does anybody know how to move it from there to here?

Moving it from a wooded shoreline area in Wilmington, Vermont to Lake Winnipesaukee will definitely be a big challenge.

At 18' wide, it is 9.5' wider than the maximum standard width of 8.5' for travel on the Vermont and New Hampshire roads. The length of 53' is the exact same length as a 53' flat bed trailer capable of hauling about 25-ton. Its' height could require the artificial smoke stacks to be removed.

Probably, best to get www.milesmarine.com in Gilford to get the needed state permits and make the move happen at 5:30-am on a sunny Sunday morning.

At $9500 or less, seems like a real fixer-upper, steal of a deal ..... especially if the two Volvo diesel engines are still running or easily made to run.

Fixing it up could be a wonderful winter, fixer-upper project, for The Dive at the West Alton Marina, this winter!

Introducing The Dive #2 ...... informally named the #2. ...

With two pontoons and two diesel inboards, the #2 could probably beat the pants off the 22'x62' barge powered with two Evinrude 2-stroke outboards that putt putt along at 4-mph. How fast could the #2 be expected to move ...... maybe 16-mph ..... or four times as fast ..... or, maybe 12-mph .... or three times as fast?

[TiltonBB]

Originally Posted by fatlazyless

At 18' wide, it is 9.5' wider than the maximum standard width of 8.5' for travel on the Vermont and New Hampshire roads.

Maximum width nationwide without permits is 8 Ft 6 inches.

[kawishiwi]

The linked story mentions disassembly & transport. Of course..."some (re-)assembly required".
I would guess it would break down to fit on a flatbed without need for special permits.

[hilltopper]

Originally Posted by TiltonBB

Maximum width nationwide without permits is 8 Ft 6 inches.

That's what he said, correct? 8.5' does equal 8 feet 6 inches.