..... Honda $nowblowers?

[Rusty]

Originally Posted by upthesaukee

Threads are much whider than the treads found on other models. ��

Dave

I hear you and you're right. Digest that for a while.

[fatlazyless]

Sort of like driving an Audi, Lexus, BMW, or Cadillac ..... doing the driveway with a $3300 Honda as opposed to the equal or better quality $699 Husqvarna .... makes an " I HAVE MONEY" type of a statement.

Well, here's some great news heard today on NHPR .....the Social Security monthly pay-outs will be paid out as usual ..... despite the gov shut-down ...... so's you all can still save up your Social Security to go buy a Honda snowblower ...... if you is really NARCISSISTIC .....and want that show-off red Honda ..... sneer-sneer-sneer!

A Husqvarna will bury a Honda!

[thinkxingu]

Originally Posted by fatlazyless

Sort of like driving an Audi, Lexus, BMW, or Cadillac ..... doing the driveway with a $3300 Honda as opposed to the equal or better quality $699 Husqvarna .... makes an " I HAVE MONEY" type of a statement.

Well, here's some great news heard today on NHPR .....the Social Security monthly pay-outs will be paid out as usual ..... despite the gov shut-down ...... so's you all can still save up your Social Security to go buy a Honda snowblower ...... if you is really NARCISSISTIC .....and want that show-off red Honda ..... sneer-sneer-sneer!

A Husqvarna will bury a Honda!

FLL, your responses, though typically trivial and frivolous, are usual less cynical and judgmental. I find it particularly interesting a day before Christmas. I sincerely hope you are well and that your vitriol towards perceived "narcissistic" people is tongue-in-cheek or at least lighthearted.

Merry Christmas to all you snowblower users, including Honda, Husqvarna, and we bottom-of-the-barrel-Craftsman-owners-because-we-need-to-but-would-choose-Honda-in-a-heartbeat-if-we-financially-could-"privileged"-critics-be-damned!

Sent from my Moto G (5S) Plus using Tapatalk

[Top-Water]

Originally Posted by thinkxingu

Merry Christmas to all you snowblower users.

I can't stop laughing every time he throttles this thing up. Sounds like a jet boat getting on plane.

Big Block Chevy Snowblower
https://youtu.be/zvR-eaKUVqU

[fatlazyless]

At 195-lbs the Troybilt 2410, a 24" two stage snowblower with pull start and electric start, lists for $599, sometimes sells for $549, is plenty good enough for clearing 2-3 car spaces, going up and down steep walkways, doing the dock that's still in the lake, and clearing away the snow from your average two million dollar waterfront mini-mansion.

Mine is about six years old now, cost $549, and still looks/runs like a new machine.


Wish I could say the same stuff about my girlfriend!


I just love my Troybilt so, so, so very much!

[DBreskin]

Originally Posted by fatlazyless

Mine is about six years old now, cost $549, and still looks/runs like a new machine.



Wish I could say the same stuff about my girlfriend!

You’d be in trouble if you had a six-year-old girlfriend you bought for $549.

[Top-Water]

Did I read this right,,, you have 6 year old electric start girl friend.

This explains everything

[TiltonBB]

I think the electric part is when he plugs the compressor in to inflate his girlfriend!

[Biggd]

Originally Posted by TiltonBB

I think the electric part is when he plugs the compressor in to inflate his girlfriend!

That he bought at Walmart. The girlfriend that is.

[Biggd]

I just worked on a customers plow truck and he had a Honda snow blower in the back. He cleans a lot of high end properties in wealthy Brookline. He told me he has 5 Honda Snow blowers at 4K apiece.
He keeps 4 of then at customers houses and one that travels with him. He said he's had them for 12 years and never had a problem with any of them.
He did tell me he uses only clean fuel that he buys at Ace hardware or Home Depot. I guess this clean fuel won't gum up the carbs when they are left sitting for any length of time. I never knew they even had such a fuel?
Anyway, he's paid for those snow blowers many times over!

[Rusty]

Originally Posted by Biggd

I just worked on a customers plow truck and he had a Honda snow blower in the back. He cleans a lot of high end properties in wealthy Brookline. He told me he has 5 Honda Snow blowers at 4K apiece.
He keeps 4 of then at customers houses and one that travels with him. He said he's had them for 12 years and never had a problem with any of them.
He did tell me he uses only clean fuel that he buys at Ace hardware or Home Depot. I guess this clean fuel won't gum up the carbs when they are left sitting for any length of time. I never knew they even had such a fuel?
Anyway, he's paid for those snow blowers many times over!

I think he was talking about an additive to gasoline that keeps the carburetor clean. I don't think ACE hardware or Home Depot sells gasoline.
My Honda Track Drive starts with first pull. It has electric start but I've never used it.

[Biggd]

Originally Posted by Rusty

I think he was talking about an additive to gasoline that keeps the carburetor clean. I don't think ACE hardware or Home Depot sells gasoline.
My Honda Track Drive starts with first pull. It has electric start but I've never used it.

He told me he doesn't buy gasoline for his snow blowers, he called it clean fuel. I had never heard of it either?
It's called Trufuel and you can get it at tractor supply also. It's not cheap, $25 a gallon but he swears by it. I may start using it in my lawn mower.

[fatlazyless]

I noticed the Town of Meredith has a $3300 Honda tracked snowblower because today I saw someone who appeared to be a town employee using it in the sidewalk area in front of the Community Center ...... oh well. My no-good, stink'n, rott'n, miserable TroyBilt 2410 from Gilford Lowe's; a six year old, 24" wide, price $550, reg $599, which has worked perfectly for the last six years done bit the dust with the heavy wet snow storm of about eight days ago.

So, I removed the black vinyl cover that's above the two belts, just to look, and it looks like one belt is all stretched out of correct length; the two rubber tire wheels for moving it still work, but the impeller doesn't throw the snow up and out of the vinyl shoot. Who knows, maybe there's something else that's broken too?

I just spent $24 for a new pull starter from the internet, from some place in Ohio, installed it with the three small screws, and it starts up real good ..... had been using the electric starter this year .... an easy fix.

I never-ever move the slider choke lever..... the choke has not been touched in six years and the engine runs real good.

So, for getting this belt problem fixed, I can take it to four different small engine repair businesses in Laconia, Lakeport, Northfield, and Tilton.

Laconia: Tri County Power Equipment ... www.tricountype.com

Lakeport: Lakeport Power Equipment

Tilton: Bob's Small Engine from craigslist ..... used snowblower selection from $150-300 .... phone 496-4437

Northfield: Lenny's Small Engine .... www.lennysrepair.com/snow-blower-repair/

It probably makes no difference where I take it ........ just that I take it someplace? Probably, a 24" TroyBilt is a model they work on a lot. Up until last week, it was the greatest snowblower ever made .... oh well! Nice thing about it, it only weighs 185-lbs, and goes good.

All things considered .....think I will go with Bob's for starters ...... from the photos, it looks like a sideline business, done in the garage or someplace .... but, I have totally no clue? .....

Nice thing about a snow shovel ......unlike a snowblower ........ a shovel never breaks down ..... and never needs two new v-belts after six years...... which are difficult to replace! ........

[Rusty]

The auger drive belt will be loose until you squeeze the lever to engage the idler pulley.
Did you try adding more tension to the idler pulley?

[fatlazyless]

That sounds correct, and no I didn't try doing that ...... is just too cold to be working on this outdoors ..... after six years use ..... is time to take it to someone who knows what they are doing, and uses the correct parts ..... think I'll go with Bob in Tilton ...... the photos in craigslist look like an organized work area .... plus it shows an equipment lift .... selling used snowblowers for $150-300 .... sounds like a part time, hobby business or something?

[thinkxingu]

Originally Posted by fatlazyless

I noticed the Town of Meredith has a $3300 Honda tracked snowblower because today I saw someone who appeared to be a town employee using it in the sidewalk area in front of the Community Center ...... oh well. My no-good, stink'n, rott'n, miserable TroyBilt 2410 from Gilford Lowe's; a six year old, 24" wide, price $550, reg $599, which has worked perfectly for the last six years done bit the dust with the heavy wet snow storm of about eight days ago.

So, I removed the black vinyl cover that's above the two belts, just to look, and it looks like one belt is all stretched out of correct length; the two rubber tire wheels for moving it still work, but the impeller doesn't throw the snow up and out of the vinyl shoot. Who knows, maybe there's something else that's broken too?

I just spent $24 for a new pull starter from the internet, from some place in Ohio, installed it with the three small screws, and it starts up real good ..... had been using the electric starter this year .... an easy fix.

I never-ever move the slider choke lever..... the choke has not been touched in six years and the engine runs real good.

So, for getting this belt problem fixed, I can take it to four different small engine repair businesses in Laconia, Lakeport, Northfield, and Tilton.

Laconia: Tri County Power Equipment ... www.tricountype.com

Lakeport: Lakeport Power Equipment

Tilton: Bob's Small Engine from craigslist ..... used snowblower selection from $150-300 .... phone 496-4437

Northfield: Lenny's Small Engine .... www.lennysrepair.com/snow-blower-repair/

It probably makes no difference where I take it ........ just that I take it someplace? Probably, a 24" TroyBilt is a model they work on a lot. Up until last week, it was the greatest snowblower ever made .... oh well! Nice thing about it, it only weighs 185-lbs, and goes good.

All things considered .....think I will go with Bob's for starters ...... from the photos, it looks like a sideline business, done in the garage or someplace .... but, I have totally no clue? .....

Nice thing about a snow shovel ......unlike a snowblower ........ a shovel never breaks down ..... and never needs two new v-belts after six years...... which are difficult to replace! ........

First your waders and now your snowblower. Surely your foam noodle savings will make up for the repair/replacements costs and aggravation of buying cheap everywhere else?!

"Penny wise..."

Sent from my Moto G (5S) Plus using Tapatalk

[fatlazyless]

As far as I know, only the $3200 Honda does not use two v-belts, and has a transmission called a hydrostatic drive, or something. All others: Ariens, Toro, Husqvarna, Troy-Bilt, Craftsman, and others ...... how your non-Honda, used $200 machine makes it happen ......year after year after year! .... https://www.youtube.com/watch?v=VgHH_Tcufx4 ...... all use the two belts which get stretched out from hard use over time and need to be replaced ..... like every five years. Plus, other things can wear out, too.

Honda makes a $8000+ snowblower that weighs 550-lbs, but my $550-24" Troy-Bilt is perfect for me!

.... old vs new .... that's when they built stuff .... https://namvideo.com/watch/AfczSG-9ygg

[Biggd]

Originally Posted by thinkxingu

First your waders and now your snowblower. Surely your foam noodle savings will make up for the repair/replacements costs and aggravation of buying cheap everywhere else?!

"Penny wise..."

Sent from my Moto G (5S) Plus using Tapatalk

He stretches that buck just like the belt on his snow blower.