![]() |
![]() |
|
Home | Forums | Gallery | Webcams | Blogs | YouTube Channel | Classifieds | Register | FAQ | Donate | Members List | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
![]() |
#5 |
Senior Member
Join Date: Oct 2004
Location: Laconia NH
Posts: 5,582
Thanks: 3,224
Thanked 1,106 Times in 796 Posts
|
![]()
Newer engines are built with close tolerances and the engine control modules are temperature sensitive. i would put in the proper thermostats. The older engines without ECM can survive without tstat but engine wear will increase. Tstat are cheap but good investments.
If you drain the block for winterizing, you may want to drill a 1/4 or 3/8 inch hole on the flat plate that holds the spring mechanism. That will allow the water to drain.
__________________
Someday may never be an actual day. |
![]() |
![]() |
Sponsored Links |
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|