Quote:
Originally Posted by SailinAway
Do you mean the hole in the pipe for the damper rod? I did that. The flame flickered but I wouldn't say it was pulled toward the hold.
|
Yes that hole in the pipe. If the stove was up to temp then it looks like a poor draft situation. That could be your primary issue with poor stove performance.
If the stove was cold then you may need to heat the flue at startup to get a good draft going and prevent initial smoke blow back. Prior to lighting the kindling place crumbled paper on top, light and keep door cracked to get a good draft going then light the kindling.
Alan