View Single Post
Old 03-26-2022, 05:31 PM   #25
DickR
Senior Member
 
Join Date: Apr 2008
Location: Moultonborough
Posts: 734
Thanks: 4
Thanked 254 Times in 166 Posts
Default

Quote:
Originally Posted by thinkxingu View Post
...Attached is a pic to clarify N/S/E/W as I think Dick has it backwards in his summary....

Sent from my SM-G950U using Tapatalk
Your pictures show what I was describing. The first two small pieces of kindling go in front to back ("N-S"), other kindling on top so as to provide air space to get the blaze going, and larger splits on top of that pile, diagonally, N-S, and E-W to provide stability as the kindling burns through and the pile settles. But I'm not putting in a full firebox load, as in your pictures. Also, my firebox (inside the bricks) is just over 17" deep (N-S) by just over 13" wide (E-W). It's a Quadrafire 2100 Millenium. Also, mine has the primary air low in front and the secondary tubes up top in the middle. After I get the stove up to temperature, I close the primary air control and the stove is running on "secondaries." The heat of the process makes the wood undergo pyrolysis, and the gases combine with the superheated air from the tubes, igniting the mixture.
DickR is offline   Reply With Quote