Circling back with some testing I've done...
I tried testing the trailer connection on the truck with a volt tester, but couldn't get 'any' from any of the four connection connection leads. I would think I would be able to get 12v by connecting my voltmeter lead to any one of those harness pins and voltmeter ground lead to ground, but I got no reading ?
Thoughts?
Next steps is to check fuses in truck pertaining to trailer, there are three.
25 Amp trailer tow park lights
20 Amp trailer tow stop-turn-relay fuse
25 Amp trailer tow lamps module
Not sure one can actually test for a bad fuse ? Continuity check ?
Your feedback would be greatly appreciated !
|