Quote:
Originally Posted by SailinAway
Dick, thank you for this detailed reply. I see you have the same challenge as I do with the size of your stove. I guess loading diagonally is the only solution. I use "bottom up" loading in the sense that I start by placing two larger logs in the bottom. I find that that creates 3" or so of air space at the bottom. Otherwise, the pile of kindling tends to collapse and smother the fire. I never knew a clothes dryer could create a draft! I open a window on the theory that it will improve both draft and air quality. My chimney is probably a bit short, and it's on the down side of a hill.
|
I'm confused. Is your stove only 14-16" both ways? Attached is a pic to clarify N/S/E/W as I think Dick has it backwards in his summary.
Unless you have too-long wood for both orientations, you should be choosing one. Short pieces for quick starts/shorter burns = N/S, normal pieces for normal/extended burns = E/W.
If your fires aren't starting easily, you either have unseasoned (too moist) wood or not enough air. The air problem could be a damper/draft issue or clogged stove inlet.
Essentially, if things are "right," you shouldn't have to jump through hoops to pile the wood in a way that there's a lot of space/air.
Sent from my SM-G950U using Tapatalk