Winnipesaukee Forum - View Single Post

camp guy · 10-03-2020, 07:15 PM

One possible solution would be to drill 2 holes, each 3/16 diameter, about 1/2 inch apart, then chisel out the space between creating a "slot" 3/16 x 1/2, then pass the USB connector through the "slot", and fill the slot with appropriate caulk.

This method has worked for me with plugs in the past. Good luck.

10-03-2020, 07:15 PM	#8
camp guy Senior Member Join Date: Apr 2004 Location: formerly Winter Harbor, still Wolfeboro Posts: 1,224 Thanks: 317 Thanked 560 Times in 310 Posts	Drilling a hole... One possible solution would be to drill 2 holes, each 3/16 diameter, about 1/2 inch apart, then chisel out the space between creating a "slot" 3/16 x 1/2, then pass the USB connector through the "slot", and fill the slot with appropriate caulk. This method has worked for me with plugs in the past. Good luck.