Winnipesaukee Forum

Winnipesaukee Forum (https://www.winnipesaukee.com/forums/index.php)
-   Boating (https://www.winnipesaukee.com/forums/forumdisplay.php?f=5)
-   -   mooring (https://www.winnipesaukee.com/forums/showthread.php?t=20606)

RUGMAN 05-16-2016 06:51 PM

mooring
 
I am getting my new mooring and pontoon boat this weekend. This will be my first time tying up my boat to the mooring. I have seen other pontoons that have two lines one on each pontoon then they coverage as one and get hooked to the mooring. Where does one get that setup and looking for other tips on dealing with my new pontoon and the ,mooring.

8gv 05-16-2016 09:23 PM

I have found these folks at Para Fun Alia in Gilford to be very knowledgeable and helpful.

Their prices are quite reasonable as well.

Joebon 05-17-2016 06:13 AM

It's a mooring bridle. You can make one yourself, but any marina store or website should have them.


Sent from my iPhone using Tapatalk

SIKSUKR 05-17-2016 02:26 PM

Parafunalia shows this one on their website.
http://www.parafunalia.com/knotical-...on-bridle.html

AC2717 05-17-2016 02:36 PM

Quote:

Originally Posted by SIKSUKR (Post 262027)
Parafunalia shows this one on their website.
http://www.parafunalia.com/knotical-...on-bridle.html

I Have a neighbor that uses that exact one from Parafunalia no problems with it and it sets up nice and easy.

RUGMAN 05-17-2016 08:51 PM

thanks for all the input. I will make my way over there,

V ger 05-17-2016 10:34 PM

Mooring Bridle
 
3 Attachment(s)
You can easily make your own. Change lengths and size to suit. Two anchor system shown to limit swing. Use single anchor if you have room.

V ger 05-27-2016 11:31 AM

Mooring Bridle Loads
 
1 Attachment(s)
I hope the attached drawing might help with selecting a mooring bridle.


All times are GMT -4. The time now is 07:34 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.