![]() |
Washing machine repair
Any recommened companys in the Ossipee area for a washing machine Diag and repair?
|
Crown Appliance
Give these folks a call. They helped us with a store and our dryer.
Good Luck. http://www.crownappliance.net/ |
Quote:
Reading there website. |
How old is it?
Generally speaking if the machine is over a certain age then you are better off looking for a new one. What you might do is post the problem and someone on the forum might be able to help you. I just saved my mom a new dryer by diagnosing the problem over the phone.
She had heat and heard the motor turning but not the drum. There are only a few things that could cause that. I told her it was probably a broken belt which my son stopped by a verified. Installed new belt cleaned out inside and she was good to go. Also there are many on line parts suppliers with price savings ranging up to 50% over the dealer and they are exactly the same part. So that being said a washer is more complicated but it is worth a shot. Good luck with it and if it was me I’d steer clear of Sears repair service. |
I'd give a call, GM........Keith at Crown Appliance is an expert service tech and has done washers and dryers for us.
|
Keith has repaired our washer , dryer. frig, trash compactor and stove over the years. He's excellent.
|
Yes, do tell us what the symptoms are. In my experience, many washer problems aren't all that difficult to repair yourself. Inadequate agitation and water pumpout might be just a belt in need of retensioning or something like a stone from someone's pocket jamming the water pump. Failure to fill, especially if set for just cold or hot water, might be just a need for a new mixing valve. As someone else said, parts are readily available online, and you could save a pile of money doing the job yourself.
|
I would call Tom Trembley at Suncook Valley Appliance repair. I have used him for all sorts of repairs in the Wolfeboro area and generally would say that if he cannot fix it, it cannot be fixed!
724-0545 or [email protected] Prompt and professional service. |
The fix
A clogged water inlet screen was the problem. cleaned it out and all is well. I have HIGH iron water I guess.
Thanks for all of the help from the forum guys. |
| All times are GMT -4. The time now is 05:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.